- Extremely flat design
- Wear-free, maintenance-free
- Low energy consumption
- Feeding / dosing / paper technology
- Filter / sieve cleaning
- Conveyor and process technology
The Kendrion arc vibrator consists of two ring shells which enclose the coil and are permanently connected to the base of the device. The armature consists of two permanent magnets housed between the two pole discs and with opposite poles axially arranged. The magnets are fixed in central position by means of special leaf springs which are also permanently connected to the base of the device. When an AC-voltage is applied to the excitation winding the unlike poles of the armature and magnetic body attract each other, and the frequency of the arc-shaped armature movement corresponds to the frequency of the AC-voltage applied.
The arc vibrator can be used as a vibratory drive and, fitted with an additional weight on the armature shaft, as a shaker solenoid. The integrated permanent magnets have a braking effect when switched off, thereby preventing reverberation.
The power indicated is reached at 90% of the nominal voltage and in warmed-up condition. The values for cycle stroke and load apply for nominal voltage and nominal load in warmed-up condition.
All products are manufactured and tested acc. DIN VDE 0580/07.2000.
For fine adjustment and extension we recommend our accessories. Please find detailed information in our catalogue Oscillating Line.
Design subject to change.
Specifications & Technical Details
|Specification||from - to|
|Supply voltage [V]||230 V AC|
|Apparent power [VA]||21|
|Cycle stroke [mm]||4 - 4.5 (with additional weight 150g)|
|Max. cycle stroke [mm]||4.5|
|Magnet weight [kg]||0.52 - 0.67|
|Protection class device (IP)||IP20|
|Protection class connection (IP)||IP00 (with connector IP54)|
|Installation type||Through bores|
|Comment||Additional weights over 150g should be avoided as otherwise the maximum permitted cycle stroke is exceeded.|